Resin Recommendations

[Ben V]

What resin can y'all recommend or use...? For the first bottle I tried out I used the AnyCubic Water-Wash Resin+ (link below) but the finished prints seem very brittle. Not sure what resin would be best for model railroad items...


https://www.amazon.com/ANYCUBIC-Visc...p_d_atf_rp_1_i

[JerryZ]

Was using Elegoo water washable resin. Results were OK, but I was very impressed with the results that Mike Fyten (Kaw Valley) was getting with Elegoo ABS-like resin (not water washable). He has done a lot of resin printing (including a very nice S scale covered hopper). I bought version 2.0 of the ABS-Like. The ABS resin is a bit flexible, whereas the water washable is very brittle.

YMMV.

Regards,
Jerry

[Ben V]

Tank you Jerry...!!! So much to learn. But I used up the water-based resin and printed smaller more solid objects like dumpsters, jersey barriers and such...

[craigtownsend]

I use a bottle Elegoo Navy Fast Gray with 100 ml of tenacious added.

[Ben V]

Thank you Craig...!